Skip to main content
Air Conditioning

AC Maintenance and Tune-Up

Scheduled AC maintenance and the annual spring tune-up — the twice-a-year program that keeps Gulf Coast systems efficient and prevents the August emergency.

  • 24/7 Emergency
  • TDLR & EPA Certified
  • Family Owned

AC maintenance and the annual tune-up are the same work on two different schedules, and this page covers both. Maintenance is the ongoing program; the tune-up is the specific visit each spring before the heat arrives. Either way it is the cheapest air conditioning work you will ever buy, because it is the work that prevents the expensive kind. Air Comfort Solutions LLC puts your system on a calendar so the worn part gets caught in March instead of quitting on the hottest Saturday in August. Family owned, 35+ years in the trade, TDLR-licensed and EPA-certified, with a 5.0-star Google rating across 137 reviews.

What is the difference between maintenance and a tune-up?

Maintenance is the ongoing scheduled program — typically two visits a year, one before cooling season and one before heating season. The tune-up is the specific spring visit that gets your air conditioner ready for a Texas summer. The work overlaps almost entirely; the difference is whether you are buying a single visit or a year-round schedule. Both are proactive. When something has already failed, that is AC repair and service, which we run 24 hours a day.

What does the visit include?

A full workup of the cooling system, not a quick look. We clean the condenser and evaporator coils our humid air fouls, flush and treat the condensate drain before it clogs and overflows, test capacitors, contactors and motor amp draws under load, verify refrigerant charge by instrument rather than by guess, measure airflow and static pressure, inspect ductwork connections at the equipment, check electrical connections for heat damage, calibrate the thermostat, and check or replace the filter. Then you get the honest verdict in plain language: what is in good shape, what is wearing, and flat-rate pricing on anything worth addressing — decided by you before any work happens.

Why does this matter more in Texas than almost anywhere?

Because Gulf Coast systems run roughly seven months a year at high load. A small efficiency loss compounds across thousands of run-hours: dirty coils and a low charge push bills up all summer, marginal electrical parts fail in the August peak, and skipped maintenance is a leading reason systems here die years early. Our humidity also feeds biological growth in condensate drains, which is why a drain that was clear last October can overflow into a ceiling by July. Attic temperatures near 140 degrees age every component faster than the manufacturer's test lab did.

When should you schedule it?

Once a year at minimum, before cooling season. If your system is past ten years old, or your home has heavy dust, pets, or a lakeside or wooded exposure that fouls the outdoor coil, twice a year is the smarter call. New systems benefit too — a first-year visit catches installation shortcuts while they are still cheap to fix, and starts the documented maintenance record most manufacturers require to keep parts coverage valid.

What can you do yourself between visits?

More than you might think, and none of it requires tools. Change the filter on schedule — a loaded filter is behind a large share of the no-cool calls we run, because restricted airflow freezes the evaporator coil and the system stops cooling entirely. Keep two feet of clearance around the outdoor unit and clear away grass clippings, leaves and mulch piled against the coil. Make sure supply and return vents are not blocked by furniture or rugs. If you see water near the indoor unit, switch the system off and call rather than waiting; that is a drain problem and it gets worse fast. None of this replaces a professional visit, but it prevents a genuine share of the emergencies.

What does skipped maintenance actually cost?

Around here it follows a script. Efficiency drifts down and bills drift up, because dirty coils force longer run times to move the same heat. Humidity control slips, so the house feels clammy even at the right temperature. Then a marginal capacitor or a clogged drain picks the hottest week of the year to fail, and what would have been a scheduled twenty-minute job becomes an emergency call. A system that could have reached fifteen years lands on the replacement list at ten. Skipping documented maintenance can also void portions of a manufacturer's warranty, right when you need it most.

What do we find most often on these visits?

Weak capacitors that still work but read well below spec. Contactors pitted from arcing. Condensate drains starting to close up. Refrigerant charge drifting low from a slow leak nobody has noticed. Filters so loaded that airflow has dropped enough to risk freezing the coil. Thermostats calling for staging the equipment does not have. None of these stop the system today, and all of them are cheaper to address on a Tuesday in March than on a Saturday in August.

What is the smartest way to buy it?

Through the Annual Preventative Maintenance Plan at $159 per year: the spring cooling visit, a fall heating visit, a waived service-call fee on any repair all year, 10% off repairs, 5% off a new installation, and priority scheduling ahead of non-members in the busy weeks. A single caught capacitor typically pays for the year. Prefer one visit at a time? Book a standalone tune-up — no membership required.

Who does the work?

TDLR-licensed, EPA-certified technicians who are background-checked and drug-tested, because the people at your door represent our family in your home. Markeith H.'s public review: “Super friendly, honest and transparent about the work that needed to be done. This is my second time working with Air Comfort Solutions and they're my go-to for HVAC services.” More on the reviews page.

Ready to put your AC on a schedule?

Call (832) 863-8325 or request service before the first heat wave books the calendar solid. Explore the full range of air conditioning services, or if you are weighing a new system, our installation and replacement team gives you honest repair-versus-replace numbers. We maintain systems across twelve communities including Pinehurst, Tomball, Magnolia and Conroe.

Frequently asked questions

How often should I service my AC in Texas?

At least once a year before summer, and twice a year for older systems or homes with pets, heavy dust, or a wooded or lakeside exposure. Gulf Coast systems run about seven months a year, so they need more attention than in milder climates.

What is the difference between maintenance and a tune-up?

Maintenance is the ongoing scheduled program, usually two visits a year. The tune-up is the specific spring visit before cooling season. The work overlaps almost entirely. Both are proactive, while repair is the reactive fix when something has already broken.

Does maintenance really lower my energy bills?

Yes. Clean coils, a correct refrigerant charge and calibrated airflow let the system cool with less run-time. Neglected systems lose efficiency every season, and in a climate with seven months of cooling that adds up quickly.

Is maintenance included in the $159/yr plan?

Yes. The plan covers both seasonal visits, waives the service-call fee on any repair all year, and adds 10% off repairs and 5% off new equipment, plus priority scheduling in the busy weeks.

From our family to yours

Comfort can't wait. Neither do we.

Call now for 24/7 service, or request a visit online and we'll confirm your two-hour arrival window.

Call any hour, any day(832) 863-8325

The $159/yr maintenance plan can pay for itself in a single repair — and easy, flexible financing options are available on new systems with approved credit.

  • Open 24 hours, 7 daysReal emergency service — nights, weekends, and holidays included.
  • Up-front, flat-rate pricingYou approve the exact price before a single tool comes out.
  • TDLR licensed · EPA certified35+ years of experience behind every visit.
Call 24/7 Request Service